VAG COM 409.1 support Volkswagen, Audi, skoda, seat,ISO/KWP, VPW, PMW,ISO9141 protocol.Supports terminal (K) bus, Terminal (L) ignition for car ECU. Register or Login $ Currency. Roses clipart free download.

Also you say 2015 STI but logger reports: CAL ID: AZ1G700K, Car: 2012 EDM Subaru Impreza STi MT. Your friend should return it as he got the wrong car. Can you provide a more detailed rr_system.log?

• VCDS-Lite does NOT work on Windows RT Windows RT runs on devices with ARM (instead of x86) CPUs and normal Windows programs like VCDS-Lite simply do not work on them. • The default installation folder is C: Ross-Tech VCDS-Lite If allowed to install in the default location, it should not interfere with an existing Ross-Tech software on your PC. • To remove older versions, simply delete the shortcuts from your Start menu and Desktop and delete the old folders which are normally: C: VAG-COM or C: VAG-COM-Beta or C: Program Files VAG-COM or C: Program Files VAG-COM-Beta Download: VCDS-Lite Release 1.2 Published 19.

It will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access. • Connect an appropriate interface between the computer and the car. Ross-Tech does not supply interfaces for VCDS-Lite. VCDS-Lite works with some of our old interfaces from many years ago, as well as many 3rd-party interfaces. • Turn the car's ignition switch ON. No need to start the engine.

Note to registered users updating from older versions: • If you're updating from VCDS-Lite version 1.0 or 1.1 you should not need a new activation. Simply install VCDS-Lite in the same location and it should use your existing activation. • If you're upgrading from an older version such as VAG-COM version 311 or 409, you will need a new activation. • First, install the VCDS-Lite and test it thoroughly in shareware mode as described above. • Then - Release Notes: • VCDS-Lite works with most 3rd-party 'Dumb K-Line' interfaces as well as the following ancient low-tech Ross-Tech Interfaces, the last of which we sold early in 2004:,,,,,.

Let it install. STEP 2: Discover Port Number that VAG-COM KKL Cable is Using Go to Control Panel. • Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'. Next to 'USB Serial Port' — you'll see a number.

• Difference between mechanical drive and hydraulic drive is clearly depicted and clarified. VCDS / VAGCOM: Testing Airbag SRS.

All content is viewed and used at your own risk. We do not warrant the accuracy or reliability of any of the information. The views expressed herein are those of the individual contributors and not necessarily those of BRISKODA or SKODA. All trademarks and copyrights remain property of their respective owners. • • • • Copyright 2002-2018 E.& O.E.

The VAG KKL USB Interface is a cost effective diagnostics and reprogramming tool compatible with the ISO9141 and KWP2000 communication protocols found on most Volkswagen, Audi, SEAT, and Skoda vehicles from 1990-2005. Our high quality VAG KKL cables use the reliable and widely supported FTDI FT232RL chip. Beware of other VAG KKL / 409.1 cables that don't!

Would be very grateful for any suggestions. Cheers, Ian Ian, mine did exactly the same. What you need to do is plug in the cable to your laptop. Now go into control panel open up or navigate to system/hardware/device manager/ports. It will probably say USB serial port (COM3 or somesuch) open up it by double clicking, go to the port settings tab and click on advanced. This will allow you to set the com port to Com1 The cable should now connect to the car.

Not to mention how many unnecessary car headaches you'll avoid — and save considerable time, energy and money. That's exactly what this VAGCOM scanner does.

Since the VAG COM cable has a USB connector, you need to install FIRST the CD/software drivers so your USB port can emulate a COM port. This is the CD that comes with the VAG COM Cable. However, the easier thing is to connect the VAG COM cable to your lap top via the USB connector and Window will detect it and automatically will find and install the required drivers so you will not need to install the CD that comes with the VAG COM Cable. Just follow this: • This requires an internet connection. • Connect the VAG COM cable cable to your USB port. • Windows should alert you about the new hardware and give you an option on where to look for the driver.

So no restrictions of any kind. Disclaimer: We are not associated to RossTech company.

Run the “CDM 2.08.30 WHQL Certified” installer to install the required Windows Drivers for the cable. (You may need to right click the installer and Run as Administrator). 4. After the driver installation is complete, we will need to setup the COM Port for the interface. Go to Control Panel > Device Manager and find the device under “Ports (COM & LPT). It should be called “USB Serial Port” and you will see the COM port number that was assigned to it. If the COM port number is 1, 2, 3 or 4, you will not need to configure the port. If it is not in the port range from 1-4, you will need to right click the “USB Serial Port”, then click “ Properties”, then click the “Port Settings” tab, then click “Advanced”. Using the drop down menu, select a COM Port Number from 1-4. Click OK and OK to exit out.

Also you can't do an autoscan or a lot of coding's/adaptions without paying $99 to register the software with Ross Tech. But if you just want to check error codes its fine. There is a comparison table on the Ross Tech website which explains the differences and limitations.

• VCDS-Lite works with all standard versions of Windows, from Windows 95 though Window 10. Both 32-bit and 64-bit Windows builds work fine, but if you're using a 3rd-Party USB interface, keep in mind that it is your interface supplier's responsibility to provide a driver for his hardware.

Xcar360 super vag com 409 cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by: Volkswagen / Skoda / Audi / Seat. Suitable for all VW, Audi, Seat & Skoda without CAN-bus system. It works with VAG COM 409.1,VCDS LITE, WHDIAG VAG COM 409 Supports all VAG vehicles without CAN-bus (about Year 1990-2004) Manufacturer-specific diagnosis of all systems (engine, airbag, ABS, etc.). German Installation Instructions The VAG Diagnostic interface 409 provides an optimal solution for the diagnosis of VAG cars built before 2004. You can read all fault codes and delete, reset service intervals, immobilizer encode teach keys and much more!

LunnysAuto.com is a vehicle search engine which offers its users with searching capabilities and access to advertisements from eBay, all in one centralized place. Searches are carried out in real-time, and from the main page you can easily browse most car makes currently available. Moreover, you can execute searches by location and by vehicle type. The whole of the US is covered, and the featured vehicle types that you can have your pick from include convertibles, coupes, trucks, hybrids and station wagons.

It's original software.) ** CAUTION: This is NOT one of those cheap $19 VAG-COM KKL 409.1 (or) 12.12.1/2/3 (or) VCDS-Lite VAGCOM cables that you can find on eBay/Google/AliExpress — with limited functions and cracked software. ** To summarize: This VAG-COM cable and software is the exact same product in terms of functionality and features when compared side-by-side to original RossTech VAG-COM $600+ kit. You're about to own it at a fraction of the cost. Also our VAGCOM works on unlimited VIN / vehicles - and on unlimited computers.

• Supports Terminal (K) bus communication • Supports Terminal (L) ignition for waking up car computing system (ECU) engine control unit • The included K/L Diagnostic interface cable works on ISO/KWP (Key Word Protocol) that were launched after 1996 • Has 3 different protocols within the same OBD2 connector — including ISO/KWP, VPW, PMW • Supports ISO9141 protocol • No DC or alternate power supply needed, just connect to your car and computer. Videos Showing Functions Performed via our VAG-COM HEX-USB+CAN interface: VCDS / VAGCOM: Testing the ABS. This presentation shows VAGCOM used on a vehicle to detect a problem with it's ABS system. Different tests and procedures are shown. • It shows you process to reading fault codes and saving the displayed DTC code to a file. • Code is cleared and after re-checking is found to have immediately re-instated.

• Start VCDS-Lite software. • Click 'Options' button. • You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2.

BRISKODA is owned and operated by Summit 360 Ltd, registered in England & Wales, company number 05710517. We are registered with the Information Commissioner, registration number ZA187892, it details the purpose for which we process personal data. Disclaimer: BRISKODA is not an official SKODA site and is not affiliated to SKODA in any way. BRISKODA are not directly responsible for information which maybe posted in this forum.

That will give you a password that you must copy and then ppaste back into that about registration box. If you get it right you will be told its registered. If you get it wrong use the uninstall program to remove it all and start the vag-com install again.

Welcome to join our Facebook group to get more free software download link and technician support.

Also supports ISO9141 protocol No DC or alternate power supply needed, just connect to your car and computer Work with most Volkswagen and Audi models sold worldwide from 1994 to current year The CVFG-A11 cable can not work if your car uses a protocol bus system like VPW, PWM or CAN -bus The K/L Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996.

• Download the self-installing distribution file. • Run it and follow the prompts to allow it to install itself. • You must install VCDS-Lite on your PC's hard disk!

Don't Even Think About Buying a VAG-COM Scanner Until You Read This — Because. “ Nearly 99% of VAGCOM Cables Sold Online Today are Half-Working! We Test Them ALL and Consistently Find That VCDS Software is Cracked-Modified On Average 54%+ of RossTech VCDS Software Functions are Unavailable Due to Inferior Chip-Firmware. Premium-Grade VAGCOM Kit That Works Like the Original.

Will check the queries per second. Attached a log file from RR. I see many of these sequences which would contribute to the 'slowness'. La la la mp3 download. SSM Bad Data response:80F1800BC07F3C7E80C0F980 Connection closed. Error sending init: Port is currently in use: COM4 J2534 connection not available, trying serial connection.repeat until next bad data.

Total delivery time is the sum of the shipping time as well as the processing time, which includes selecting the product, checking quality and packing the product. For more Shipping details and more Delivery Time details click, pls.

You should uninstall the suspected software or device for troubleshooting this problem. • It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System. • Cable must be plugged into the vehicle with ignition ON. • Test the cable with each COM Port from 1 to 4 in Windows Device Manager. • Make sure that the driver is installed and configured as explained in Step 1. More Troubleshooting Tips: • Only Audi, Volkswagen, Skoda and Seat vehicles are supported.